We just bought a new Busellato Optima Cnc with a 23 drill head. I use the same post for Alphacam and cabinet vision. Our old machine did not have a multi drill head so I had to write the post to drill as a mill setup. I’ve modified the post and have it drilling with the gang head but there is a pause between head going up and going to the next set of coordinates. I wrote the post to treat a drill as a “hole”. When I program in TPA CAD as a drill fitting I do not have the pause. Does anyone know what I would need to tweak in the post to eliminate the pause? Also, this is the newest Genesis Evolution. Thanks for the help!
Thread: Alphacam Multi Dill Post
Results 1 to 2 of 2
-
06-04-2019, 10:00 PM #1
- Join Date
- Dec 2018
- Posts
- 3
Alphacam Multi Dill Post
-
06-06-2019, 12:18 AM #2
Member
- Join Date
- Apr 2015
- Posts
- 327
Re: Alphacam Multi Dill Post
Try send me a code from TPA and from Alphacam.
Alphacam post and VBA macros, Autodesk HSM post.
www.cadcam-softcz.cz
Reply With QuoteSimilar Threads
-
AlphaCAM post
By KLarson in forum ShopsabreReplies: 9Last Post: 08-09-2016, 04:32 PM -
Dill feature without center drill feature
By LockTech in forum BobCad-CamReplies: 2Last Post: 08-25-2011, 02:38 PM -
UNS Threads Dill Size
By teccboxx in forum MetalWork DiscussionReplies: 4Last Post: 05-14-2011, 08:54 PM
Tags for this Thread
Posting Permissions
