[precengineer]

Hi guys

anyone have an edgecam post for my machine running fanuc 30i

we use delcam as well for 5 axis and they give us posts free but edgecam want to rip me off for one as they did with my dmg evo 50, spent more time correcting myself so much for support

[meegers]

Yep, have a MX-520 post proved and used by Matsuura waiting on my desktop.

Contact your sales rep and you can have it asap.

Obviously Delcam must be aware that you use both P/Mill and Edgecam if they're giving you free posts. They didn't give me a free post in the 12 years I used their software!

[Adrian Rideout]

Hi meegers

I am currently writing a MX520 imperial post and I am having some problems. Would it be possible for you to let me have a copy of your post. It would save me a lot of time.
Thank you

[tpeach77]

Hi Precengineer,

We're taking delivery of a MX-520 and we use Edgecam. Did you manage to get a working post for your machine or did you have to go through Edgecam in the end?

Best regards,
Tim