502,814 active members
4,671 visitors online
Register for free
Login
IndustryArena Forum > CNCzone Club House > European Club House > I need some advice imos to Aspan
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2014
    Posts
    12

    I need some advice imos to Aspan

    Hello forum masters,

    I need some advices or opinions on imos to Alphacam or Aspan.

    I have ordered a flat bed CNC running Osai controller, and it will be shipped in few weeks time for making kitchen cabinets.

    The CAD system is imos ix, I need to decide the good solution to link imos ix to CAM software to control the CNC.

    I was told that Aspan can read ASC file, and Alphacam can only read DXF from imos.

    It will be very grateful if you guys can give me advises.

    Any successful cases in the forum?

    Many thanks.

    Nap

  2. #2
    Registered
    Join Date
    Apr 2014
    Posts
    3

    Re: I need some advice imos to Aspan

    Hello Nap
    Imos can do all the programs you want
    why you want to link it to alphacam
    Zaki
    briejawi{at}gmail

  3. #3
    Member
    Join Date
    Jun 2014
    Posts
    12
    Hi BrieJawi,

    Thanks for your reply.

    I do not have too many options here in local country. Only three CAD CAM that can operate the Osai controller.
    The imos sales gave me a list that can link to the third party CAM, and Alphcam is one of that.



    Quote Originally Posted by briejawi View Post
    Hello Nap
    Imos can do all the programs you want
    why you want to link it to alphacam
    Zaki
    briejawi{at}gmail

Similar Threads

  1. Configuring ASPAN 9.4 with SCM Pratix 48NST
    By Thomcnc90 in forum CNC Machining Centers
    Replies: 0
    Last Post: 09-07-2015, 10:24 AM
  2. Aspan v3.0/v3.1 diskettes for Morbidelli Author 504
    By Huskynut in forum CNC Machining Centers
    Replies: 0
    Last Post: 03-23-2015, 12:55 AM
  3. Aspan 7.2 G Code to include vacuum hood down and up position
    By najatra in forum Employment Opportunity
    Replies: 0
    Last Post: 10-14-2013, 12:36 AM
  4. Aspan 6.2 and Tria 4000
    By datacon1 in forum Commercial CNC Wood Routers
    Replies: 1
    Last Post: 05-26-2013, 06:50 PM
  5. Material advice and advice needed
    By kiyoukan in forum Mechanical Calculations/Engineering Design
    Replies: 0
    Last Post: 02-15-2012, 08:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •