[craigytt]

Good morning.
I am wondering if anyone can help?

I want to try and backup the SRAM data on a fanuc Oi-TD. However it is a touch screen and has no soft keys to hold down during start up.
Is there another way to enter the boot menu without the 2 x soft key press method?

Many thanks.

[zavateandu]

must be open cnc ,u have a white rotary switch on the cnc ,back in the electric panel, put on F and u will have the NCBOOT32 menu and u can save the sram there.
Before this try to boot holding 6 and 7

also on touch screen you can hold press on the upper-left corner of the touch panel screen while power on.
one solution must work for you.
good luck

[craigytt]

must be open cnc ,u have a white rotary switch on the cnc ,back in the electric panel, put on F and u will have the NCBOOT32 menu and u can save the sram there.
Before this try to boot holding 6 and 7

also on touch screen you can hold press on the upper-left corner of the touch panel screen while power on.
one solution must work for you.
good luck

Thanks for the reply. I have not noticed the white rotary switch. I will have a look tomorrow.
Do you rotate it to F while off and then power on the machine?

Thanks

[zavateandu]

yes,power off,put on F and then power on,u will see nc boot software .
after save sram,power off and put back to 0 and power on and u are ready

ps:try the other 2 options first