Need some help please. G-code generated by the post processor I have will not cut a straight line from point A to point B. For example, if a line is programmed to start at point A (X 0.000”, Y 0.000”) and travel to point B (X 10.000”, Y 0.000”) the resulting line will be skewed off by some amount. The resulting line may give a point ending at C (X 10.000”, Y 0.200”). This error occurs in both X and Y directions of travel with unpredictable outcomes. Talked with folks at Bobcad,but they say it will take 2-4 weeks to modify a post for me.

Anyone have a post they can share?