Re: Treadmill motor/drive help
Originally Posted by
Al_The_Man
It is the MC2100 that requires a 20Hz PWM signal to run, I have built a Picmicro that runs these with STOP/START PB's.
Also there is a resister you can remove if you don't want the feature that requires you set the pot to zero before going into run.
Al.
I have the MC2100. I'd like to disable the feature that requires you to set the pot to zero before going into run. Which resistor do I need to remove.
"You can't teach stuff in a school that you would learn in real life unless the real life people are in charge of the school." - Gene Sherman