Help me!

I am a total beginner of CNC
In my guess, I feel that the connection from the motor drive to the VFD is not going well.
Can you tell me how you solved it?

Current status
• Completed wiring and assembling everything according to the manufacturer's instructions.
-It was possible to operate Mach3 and move it manually in the X-axis / Y-axis / Z-axis direction.
? I was able to complete the commissioning when I made VFD and spindle independent.
? I switched PD001 / 002 to 1 which is the VFD setting
? When the motor drive (Soigeneris STDR-4C) and the VFD are connected by wiring, the VFD power lamp does not turn ON.
The voltage of the VFD input power supply was measured by a tester, but the voltage is zero.

environment
Home power: 100V 15A 60Hz
Machine: Routakit HD
PC: Windows 10 (Mach 3)
MotorDriver: SoigenerisSTDR-4C (EthernetSmoothStepper / GeckoDriveG540)
VFD: Huanyang Hy01D511B


I have been troubled for more than a month on this issue and have not advanced.
I want you to help me.
May I have a reply?