I am trying to use the @ symbol in text. It seems to dissappear when I vectorize the text. Has anyone else had this problem and is there a way to get around it?
Marty
Thread: text
Results 1 to 3 of 3
-
05-31-2007, 05:45 PM #1
Registered
- Join Date
- Jan 2006
- Posts
- 24
text
-
05-31-2007, 06:36 PM #2
Registered
- Join Date
- Apr 2005
- Posts
- 1268
Hey Marty;
Welcome to the Bobcad world of funky fonts. Unfortunately, I do not have the answer and had a similar problem with one of the other fonts. I ended up leaving a blank in the letter space and drawing it in with line draw.
I emailed bobcad but never got a response!
You may just wander around the different fonts and sooner or later, you may find one that "works".
Bill
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
-
05-31-2007, 08:26 PM #3
Registered
- Join Date
- Jan 2006
- Posts
- 24
I tried a number of fonts. Some would not show up at all. Some would show up on the screen, but after vetorizing they were gone. In some of the fonts, I could get the @ to show up by putting a space on either side, but it still would go away after the vectorizing.
Marty
Reply With QuoteSimilar Threads
-
Need Text Help
By becikeja in forum BobCad-CamReplies: 14Last Post: 11-12-2006, 06:54 AM -
machining text
By bennett71 in forum MastercamReplies: 22Last Post: 10-19-2006, 12:17 AM -
Text Editor
By mustangsally in forum G-Code ProgramingReplies: 4Last Post: 06-11-2006, 07:17 PM -
Text programs
By Super G in forum Uncategorised CAM DiscussionReplies: 8Last Post: 11-24-2003, 04:36 PM -
Text
By Bigfoot1 in forum OneCNCReplies: 1Last Post: 04-05-2003, 04:06 AM
Posting Permissions
