Re: Okuma face radius
hy chris, sorry for the late reply, but this is your 1st post, and 1st posts are not shown immediately, but after a period of default verifications; as a result, when it appears, it is not shown on top of the forum, but towards the bottom okey, now let's put your values in milimiters :
I have a radius that won't come up to size coming up small by around 0.127. depth is within 0.01016, start dia is within 0.0127
Radius has a tolerance of 31.75+/- 0.0127 and is consistently 0.127 undersize at 1.245R
I'm running a 55 degree diamond (left hand) .008R horizontally, Rad is 31.75R X 3.429 dp with a start on dia of 28.2194
i am sorry, i can't draw your part; pls share a drawing / sketch / use chalk, ms paint, sand, draw on a dirty bus
also, if you wish, share the program and the measuring method : you know, maybe there is something ...
Tool is around 0.0127
below center
please, how did you measured this excentricity ? kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg