Hey all
I was lately in the process of building en Epoxy Granite CNC mill and this actually gave me an idea. Sending machines is often difficult because of the weight and size. So the idea would be to sell kits for EG machine building. The kit would include for instance servos plus drivers, controller, wiring, ball screws, and linear rails, the spindle, and various fixtures. This would be inexpensive to ship. Then, the buyer of the kit would have all the instructions so build the mill itself in the most simple way one could find. This would decrease the overall cost as most of the work would be done by oneself, and not by the seller. Off course, help would be provided all along and the controller would be already set up for the machine, as well as the included wiring. The machine could be easily cast in self-made MDF molds. Meanwhile, the included fixtures would provide correct alignment of the rails.
This is a very rough estimate of how it would work, but if it turns out some people think the idea could work, then I might consider pushing things further.
Thanks for your consideration !
Cyril