Hello all,

My buddy just bought a Arrow 750 for cheap, screws seem awesome, can move 0.0001 and back and watch indicator move the same, pretty sweet. But the Spindle bearings sound horrible and have about 0.001 runout. I believe a crash took out the bearings. I have the drawings but not sure exactly how to get the spindle out. Seems like you have to remove the bearing retainer plate on the bottom then get the pulley off to slide everything out the bottom. Not sure how to remove the pulley. Does the belleville retainer at the top unscrew? Held in with set screws? roll pin? All my speculations are by looking at the drawing only. If some one could give me the basic procedure that would be great.

Thanks all