Hi All,
I'm new to this forum, and i have no previous experience with CNC controller in particolar with Fagor.
I've bought a small CNC machine with this control; When i power up the machine, on the self test appear : Error code 094: Parity T, G53 - G59
This is not a blocking error, but i'm unable to understand this error.
I've also read the manual, but i don't understand what mean : Parity error in tool table or zero offset table G53-G59. The CNC resets the serial line RS232C machine
parameters: "P0= 9600", "P1=8", P2=0", "P3=1", "P607(3)=1", "P607(4)=1", "P607(5)=1".
Serial Line problem?
This is the picture of the machine.
Thanks a lot.