First, some pictures...
First some pictures...
First, some pictures...
First some pictures...
Nice work.
Many thanks :-)
Now the machine is abandonated for some weeks. Mounting the slidecovers I noted that some parts are missing.
Someone has changed the position of the limit switches, to get a little bit more travel. But of this reason he take out the slidecover.
I had a look to some videos on youtube, bit nothing. I can´t localize the original part, because its under the table cover.
Now I redesigned the missing piece and sent it to laser cutting and bending. If I get the pieces, I will weld together and paint them.
Its a slide cover to cover the Y-Axis and the front part of the lower case.
Last edited by seahawkibiza; 10-01-2019 at 03:14 PM.