The Z-lead screw often crashes with my wooden work pieces if they are high enough to reach that level, so I need to know if it is possible to cut a bit of this lead screw and how much I can cut without creating any problems.
Results 1 to 2 of 2
Threaded View
-
08-13-2019, 03:54 AM #1
Registered
- Join Date
- May 2006
- Posts
- 309
Can I cut a bit of the z-lead screw on a Taig mill?
Reply With QuoteSimilar Threads
-
Tormach PCNC 440 Mill precision/ Rolled lead screw
By astromachinist in forum Tormach Personal CNC MillReplies: 41Last Post: 03-08-2016, 04:24 PM -
Lead Screw pitch and Bearings,coupling for lead screw
By Power_user_EX in forum Linear and Rotary MotionReplies: 1Last Post: 06-12-2012, 12:37 PM -
Mini Boring Head for Taig Mill (lead screw graduations)
By slashr76 in forum Taig Mills / LathesReplies: 6Last Post: 08-29-2010, 08:27 AM -
Taig - Wandering mill, Lead screw?
By bluumax in forum Taig Mills / LathesReplies: 123Last Post: 05-23-2008, 11:14 PM -
taig mini-mill screw conversion: acme or ball?
By nickydubs in forum Taig Mills / LathesReplies: 1Last Post: 10-25-2006, 05:12 PM
Tags for this Thread
Posting Permissions
