Originally Posted by
sundewzer
I just downloaded uccnc a couple weeks ago. I am guessing it is the latest version. Sorry, not near the mill right now.
I was calling it through the single line on the main screen or using the probe button.
The light don't change or flash on either the diagnostic sceen or on the board.
When I type the command in and hit enter nothing happened. The machine doesn't move at all. Then if I type the same command again it will work Exactly as it is suppose to.
If I use the probe button it does one of four things;
1. works perfect, fast down, backs off, then slow down then backs off again.
2.backs off, slow down, backs off
3. Fast down, backsoff, backsoffs
4. Back off, backoff.