I have a problem in my Cincinnati milling machine
That after it works
It gave me "power supply fault"
And machine is stopped
I have a problem in my Cincinnati milling machine
That after it works
It gave me "power supply fault"
And machine is stopped
Check if you have around 310V from power supply psr4, I assume you have kollmorgen drive.
Sent from my D5803 using Tapatalk
You have a bad control power supply if you have a 2100 control. The problem is not in the PSR4 of your drives.
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
thanks for your reply
i will check and update you soon
thanks for your reply
could you explain to me more about
bad control power supply
wait your reply