Yep. I still want one. I am ready whenever you are.
I am guessing that I will need to get my own probe styli. What is the tip thread? 4mm x 0.7mm?
Yep. I still want one. I am ready whenever you are.
I am guessing that I will need to get my own probe styli. What is the tip thread? 4mm x 0.7mm?
Hi.
I send you two probe styli bonus. Problem, in my opinion is I am from Europe and you are in US ...
Counting you in! And that 50mmxR2.5 styli is in the deal for ya Bob. Correct, thread is M4 (4x0.7), mating shaft end is OD7mm.
You could look at a spare 25mm styli although this is yet to be tested (need lighter rated spring for that small one). I'll let you know, I plan on doing this later on.
Keep you guys updated
That's one impressive piece of kit! Any chance for a mere mortal like me to get my hands on one?
- Lars Bjerke
CNC-ing an SX3 to make a full-size CNC router to make some speakers. Why do it simple?
Welcome in our group Novec, thanks! So far; Bob, Bill, Novec, two colleagues/friends, and myself.
I was planing on placing an order for tools, mat & components this coming weekend and start a small prod batch. Somewhere like two dozen of them to hopefully secure a good 18-20 fully tested and ready to go around mid/end of Nov.
That's good news Mecanix. Looks like the testing produced positive results.
Have a good weekend.
Bill
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
Sounds great! I was about to suggest taking some of the assembly work myself, until I realized accuracy and testing are sorta important with this kind of equipment...
What's the outer diameter of the main body? I have a vague memory of reading it but I can't seem to find it. Judging by your designs and pictures it should be relatively straight forward to make a TTS compatible shank, provided I have the right stock.
- Lars Bjerke
CNC-ing an SX3 to make a full-size CNC router to make some speakers. Why do it simple?
Hi.
Any updates on this?
Im looking at getting a touch probe and your one looks great.
I'd be interested, as well !
www.CNC-Joe.com
CNC Is Not Just My Passion.. It's My Addiction !!!!
Have you gotten any further on this, Mecanix? These are trying times, I know...
- Lars Bjerke
CNC-ing an SX3 to make a full-size CNC router to make some speakers. Why do it simple?