584,337 active members*
6,192 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Oct 2013
    Posts
    16

    Grizzly g0704 quill

    Hi can some one help . i want to change my mt2 spindle for an r8 spindle. iv been told that i can just buy all the things that would be in a grizzly G0704 spindle and it will fit in as they are all the same . Could some on with a Grizzly g0704 R8 measure the outside diameter of the quill as i think this is the deciding factor . The out side diameter of my quill is 60mm .

    Thanks in advance

  2. #2
    Join Date
    Nov 2006
    Posts
    20

    Re: Grizzly g0704 quill

    I measured mine, and it's 60mm.

  3. #3
    Join Date
    Oct 2013
    Posts
    16

    Re: Grizzly g0704 quill

    Thanks for the reply and thats an R8 ? perfect if it is . it would also be good if i can find some one in the UK that supply's spares

  4. #4
    Join Date
    Jan 2013
    Posts
    630

    Re: Grizzly g0704 quill

    Took all of about 3 minutes to swap mine out.

  5. #5
    Join Date
    Oct 2013
    Posts
    16

    Re: Grizzly g0704 quill

    what was in it before . Did you get all the parts from Grizzly ? i really need to find some where that will ship to the uk

  6. #6
    Join Date
    Jan 2013
    Posts
    630

    Re: Grizzly g0704 quill

    An MT2. Came direct from Grizzly.

Similar Threads

  1. Wondering out loud about quill g0704
    By timberwolf5480 in forum Benchtop Machines
    Replies: 6
    Last Post: 02-21-2019, 03:20 AM
  2. G0704 quill tight after belt upgrade
    By DamnColdGarage in forum Benchtop Machines
    Replies: 3
    Last Post: 07-28-2018, 03:20 AM
  3. G0704 Quill DRO
    By rob_b in forum Benchtop Machines
    Replies: 3
    Last Post: 09-21-2017, 04:23 PM
  4. Grizzly G0704 CNC kis
    By arizonavideo in forum For Sale Only
    Replies: 4
    Last Post: 05-21-2016, 05:05 AM
  5. Replies: 1
    Last Post: 06-01-2012, 11:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •