Originally Posted by
solly747
Hi folks,
I've just setup endstops of X and Y. For my Z I use a touch plate. I want to Home Z using the touch-plate (3.9mm thick) first, then I want it to home X Y before starting the job.
One thing needs to be noted is that my Y homes 142mm past the start of my work area. So I can set an offset on my Y with something like M206 Y-142??? I think.
This is what I have now but I'm very unsure if this will work as I want it to.
;Project <project>
;Created by Estlcam version <version> build <build>
;Machining time about <time> hours
G28 X Y
G1 Y150 F600
M0 INSTALL TOUCH-PLATE
G28 Z (Home Z to touchplate)
G1 Z10 F120
M17 (Enable Steppers)
M0 REMOVE TOUCH-PLATE
G1 Z-3.9 F120
G92 X0 Y0 Z0
G1 Z4 F120
G28 X Y
G90
Thanks in advance,
John