[pdj_cnc]

More on 8020-

This is the company that makes the extrusion and does the custom machining for us. Because we have tight tolerances (0.002") and other specs on the parts we order we must go through a distributor that generates their internal drawings based on our design. And then the order is submitted to the custom marching department at 8020.

The distributor for 8020 is Teco pneumatic, We have worked with them for years and John is our go to guy.

When there is a delay with 8020 I call John at Teco to find out why. He is a nice guy and can tell you first hand that there have been times when 8020 has been slow and I call to ask why.

We do our best here to keep overhead low and orders high, I love being busy making parts and you will too!

Best regards

One more thing if I may-

The machine you got is not the machine we are shipping. There are many references to the new version on our site - these videos show all the switches, e-stop, tool setter, lap top tray, construction, etc. - the list of changes is very long. The new design is bolt through and completely different from version 2 shown in the video I posted above.

I really appreciate being allowed to clear this up.