510,069 active members
3,145 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tree > PC2100 Control Alarm 44-84
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Jan 2013
    Posts
    1

    PC2100 Control Alarm 44-84

    I have a Tree VMC 800 machine that was shutdown after a power failure for a month. When trying to boot the control I get Alarm 44-84 No axis configured. I also get Failed Conv. Servo error. I pulled the RT CPU MB connected a video card, monitor, power supply and keyboard. It boots to the bios Says time date not set. Anything else I can do or check?

  2. #2
    Member
    Join Date
    Sep 2019
    Posts
    1
    I cant help with that Problem, But I have the same machine and was wondering if you know where I could get the wiring Schematic for the machine or the service manual?

  3. #3
    Junior Member
    Join Date
    Sep 2008
    Posts
    92

    Re: PC2100 Control Alarm 44-84

    You still have problems with this equipment ... I am a technical specialist in this control do not hesitate to contact us Nosotros Servicios Automatización y Proyectos mail serviceandtraining@live.com.mx

  4. #4
    Member
    Join Date
    Oct 2006
    Posts
    47

    Re: PC2100 Control Alarm 44-84

    Have you gotten this straightened out?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •