I hope this helps many of you.
I hope this helps many of you.
Hi,
correction.........Mach4Hobby has six out-of-band axes just like Mach4Industrial.
Craig
This comparison is listed on Artsoft's site, so I would recommend contacting them to correct it if that's the case.
Please review the link under versions comparisons.
https://www.machsupport.com/download...main-programs/
Hi,
the correction was provided by smurph, the lead developer of Mach4 at New Fangled Solutions, formerly Artsoft.
Additionally I have used two out-of-band axes with Mach4Hobby....so I know it works.
Craig