[tspiszak]

Hi guys.
My machine won't do a proper tool change. It puts away a tool in the drum, z goes up, and alarms out. It doesn't rotate the drum while at spindle

I found a way to run the machine all day, I put T0 M6 before tool change, so it puts tools in the drum, drum parks, rotates to next tool, drum then moves to spindle, z goes down and program continue.

Any suggestions much appreciated

Thanks

Tom


Sent from my D5803 using Tapatalk

[tspiszak]

This is the alarm when I try to rotate the drum while it's by the spindle Attachment 428596

Sent from my D5803 using Tapatalk

[tspiszak]

Case solved.
3 phase cable going to a drum motor broke on 1 bend. Just by pneumatic cylinder.
Hope it helps someone on future.



Sent from my D5803 using Tapatalk

[peloflex]

Thank you for posting!