Hello,
I´m trying to get a 12000rpm spindle to work in closed loop with a Delta C2000 with option card for incremental encoder but for some reason it wont spin up to more than 6hz for a while and then it overloads.
I have tried first a chinese inverter and now the Delta C2000 and the same accurs on both of them.
The spindle is a chinese ATC water cooled ATC spindle, rated 6000rpm 200hz, max 12000rpm 400hz.
Encoder 1024ppr differential ABZ signals.
The encoder seem to count up fine on the inverter display and one lap corresponds to 4096 pulses.
Any ideas?
Results 1 to 2 of 2
-
11-14-2019, 06:01 PM #1
Member
- Join Date
- Dec 2006
- Posts
- 112
Closed loop with Delta C2000 and 12000rpm 400hz spindle
-
11-15-2019, 02:21 PM #2
Member
- Join Date
- Dec 2006
- Posts
- 112
Re: Closed loop with Delta C2000 and 12000rpm 400hz spindle
Now its working in speed mode at least but the positioning seem to be harder to get working.
Reply With QuoteSimilar Threads
-
Closed loop spindle controll VFD with m5i20
By visky in forum LinuxCNC (formerly EMC2)Replies: 2Last Post: 10-07-2012, 06:29 PM -
Encoder connection from closed loop to semi-closed loop
By botha.y in forum FanucReplies: 0Last Post: 03-13-2012, 11:15 PM -
Closed Loop Vector Drive for Spindle Motor
By vishnu in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 04-27-2011, 11:22 AM -
can any AC spindle motor be used with closed loop velocity control?
By Mike Braddock in forum Servo Motors / DrivesReplies: 6Last Post: 09-10-2008, 02:40 AM -
Closed Loop Driver vs. Closed Loop Computer
By ojibberish in forum Gecko DrivesReplies: 3Last Post: 06-08-2004, 05:30 PM
Tags for this Thread
Posting Permissions
