Mill-Turning - need settings for brass
I'm attempting my first mill-turning on my Tormach. This is where the stock is held in the spindle and the lathe tool is in the vise. I'm machining 3/4" diameter brass. I'll hold the brass in a ER32 collet with 1.5" stick-out. The post processor for this doesn't accept constant surface speed or speed per revolution. I have to use RPM and feedrate, just like normal milling. Brass is pretty forgiving, which is nice. I'm looking for some starting RPM, feedrate and depth of cut suggestions.
"You can't teach stuff in a school that you would learn in real life unless the real life people are in charge of the school." - Gene Sherman