[Jays68yak]

I tried to send you a message but apparently you have it turned off....

I have the specs for the pull studs. They are not generally made anymore, which is problematic, but I think Roberto has some.... Surprised that 248V would cause any damage, so it is probably just something simple. I recently got a DM4400M, but it is a different type of beast from what you have. I was interested in the one you got, but it wasn't the right time for me.

On my way back from buying 20+ bt30 holders and almost as many pull studs.

In talking to Roberto, there's a pot that can be adjusted to allow for over/under voltage. With that info I go it going. Still need to build a stand and get it into the garage.

Are you local? Glad you didn't get the one I did ????. I guess I was the first to respond, first to look at it and I put a deposit on it without it powered up. Didn't want to loose out on this one.

[MrMetric]

Yes... I am in Sunnyvale. And, yes, I was interested in that machine for my brother. But buying something for him is money out of my pocket, so one can legitimately ask whether or not there is any logic in such an endeavor!!!! LOL

[Jays68yak]

Yes... I am in Sunnyvale. And, yes, I was interested in that machine for my brother. But buying something for him is money out of my pocket, so one can legitimately ask whether or not there is any logic in such an endeavor!!!! LOL

Well in a way you owe me a beer then. I saved you money. Haha.

Is your machine up and running? Just a hobby machine?