Re: Changing to Ethernet on Haas mini mill and vf2 ?
I installed a floppy to USB emulator in my HAAS Mini Mill and my VF-0E.
Both were plug and play and are still working perfect today.
You just have to buy a bunch of smaller USB sticks ($2 each) so you have spares.
And you have to format them to 750KB blocks.
I have the program if you need it.
Floppy to USB Converter, Floppy to USB Emulator, Floppy Disk Drive, Floppy Drive to USB
Timothy
Dyna Mechtronics DM4400, Bridgeport Discovery 300, HAAS VF-0E, HAAS VF-2D
BobCad 16, 20, 24 and now V25