512,360 active members
2,811 visitors online
Register for free
Login
IndustryArena Forum > Metalworking Machines > Daewoo/Doosan > 1997 Daewoo LYNX 200A lost parameters. FANUC 21T
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Jul 2018
    Posts
    2

    1997 Daewoo LYNX 200A lost parameters. FANUC 21T

    Hello everyone, I bought a Lynx and had a cpu problem. Bought a new board and the parameters are completely lost. I can not see the ladder either. Any advice on how to get them or buy them? Thanks in advance.
    Regards
    Ernie

  2. #2
    Member
    Join Date
    Jul 2005
    Posts
    329

    Re: 1997 Daewoo LYNX 200A lost parameters. FANUC 21T

    This is, I think the 18th time I've seen this type of problem here.
    Have you contacted Doosan or your distributor?

  3. #3
    Registered
    Join Date
    Apr 2011
    Posts
    530

    Re: 1997 Daewoo LYNX 200A lost parameters. FANUC 21T

    Your ladder won't get displayed till you set the PMC option bit that tells the control which PMC type you are using. I don't have a backup that will work with your machine.

  4. #4
    Member
    Join Date
    Dec 2013
    Posts
    38

    Re: 1997 Daewoo LYNX 200A lost parameters. FANUC 21T

    Contact to support@quanutmautomation.com They will help you with parameters

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •