So after two years or something like that my bosses decided its finally time to set up unused bar feeder called Spacesaver 2410.
And here lies the problem or should i say somewhere amidst the bar feeder and bar feeder subprogram.
Also machine is operated with Siemens 828d and not Fanuc.
Also subprogram
M31
G0 Z50
M69
M51
G4 F3
M51
G0 Z0.5
M68
G4 F3
M17
Barfeeder sends alarm "waiting for m code" around m code M51 which is supposed to be right code but i have no idea anymore.
So where lies the problem.
Any help strongly appreciated.
Thank you.