Trying to get the Turn module to work correctly within Kmotion. Tom K helped get all set up with C files. The problem I have is that I cannot seem to get Mach to recognize a homed position.The LED lights are always red. The home buttons do not work,but you can type G28 in the command line and the machine moves to the homing switches correctly, but I get no indication of LED turning green for either axis. I believe that means I cannot set up coordinates for auto operation to happen in the correct place. The motor home soft limits are set to auto zero. I tried to change the G28 home location coordinates in this tab to the actual .25 back off from limit positions, but that did not change anything.I have gone through the Turn manual and cannot find anything else to check. Thanks for any suggestions.
I have also tried just moving the axis to a safe location and clicking on the home x and home z buttons and that does not seem to work either.

Thanks,
Scott