Hi - I need some help if anyone could advise please.

I can control my spindle from the VFD perfectly with the VFD controls.

I have now connected my Mk3/4 + output board to the VFD as the blog describes and I cannot get it to function.
I have set the VFD to :- PD001=1, PD002=1 and PD070=0.
I have set the software output pins to 1 for on/off, 6 for speed and 2 for mist.

Have checked 12V supply to output board and the 0/10V pot returns 1V across the terminals.

The IO screen display illuminates correctly on both MDI and top button input

Two things I do not know. 1/ There is a jumper (J1) on the VFD to the right of the terminal blocks. My jumper setting is to the left (V1) is this OK?
2/ Do I need to adjust the 0-10v pot?

Could there be any other software settings I need to attend to?

Any suggestions very much appreciated.