Looking for a source or a specification for the cathode (negative?) wire which runs from the laser tube to the power supply. Insulation seems thicker than "typical" 300V wire but not as robust as the red wire. Can this side of the laser just use regular wiring?
I am running a 100W RECI W4 with a HY-DY13 power supply.
Thread: Cathode Wire
Results 1 to 4 of 4
Threaded View
-
12-11-2019, 08:59 PM #1
Registered
- Join Date
- Aug 2005
- Posts
- 58
Cathode Wire
Reply With QuoteSimilar Threads
-
Mitsubishi FX-10 1997, Problem with wire detection before the wire chopper.
By Jeff247 in forum EDM Discussion General TopicsReplies: 0Last Post: 10-29-2019, 03:26 PM -
French cleat wire caddy (cleaning up your spools of colored wire)
By davy182 in forum VideosReplies: 0Last Post: 02-08-2017, 02:24 PM -
Where do I connect the cathode on an anode only PSU?
By coreman in forum Laser CO2 Tubes, Diodes, RF and Power SuppliesReplies: 7Last Post: 11-06-2015, 10:45 PM -
USER MANUAL SODICK MARK X or XI wire EDM, and wire breakage
By stan34 in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 01-14-2015, 03:56 PM -
power supply size? for multi wire (total 250 inches of wire)
By DanOSB in forum CNC Wire Foam Cutter MachinesReplies: 5Last Post: 03-02-2009, 11:34 PM
Tags for this Thread
Posting Permissions
