If anyone has an open post for the Mazak for mastercam 2018, 2019, or 2020, they could share we'd appreciate it.
I had a programmer leaving here for a higher paying job in his home state, offer us a deal to make a post for our Mazak VCU500A-5X in exchange for gap family health insurance coverage which is not really cheap. If I could get a post that was close it might help him need less time to proof it, tweak it, and get it to us.
I think the new job has him working 3-4 hours more per day, and all month where this one was 2 weeks on and 2 weeks off, so his time is more scarce than what he was working with when he made that offer. It would be great to help reduce the time burden so he can deliver on his end of the deal.
The Mazak VCU500A-5X is a Y aligned trunion tilt machine that tilts the rotary to the left as you look into the cabinet.
Open source posts are neat because they are open to edit quick if you can find the thing that needs the edit.