586,108 active members*
3,354 visitors online*
Register for free
Login

Thread: Mach3 g-code not running when Start Cycle

Results 1 to 2 of 2
  1. 12-18-2019, 07:17 AM #1
    NicR
    NicR is offline
    Join Date
    Dec 2019
    Posts
    1

    Mach3 g-code not running when Start Cycle

    Please could someone assist me with this issue I've been having. One day my mach3 was working perfectly and then the next it just stops.

    I can jog my machine without any issues. I can zero all axis etc. But when I press cycle start the gcode just hangs on the first line. No alarm msg next to the reset button either.

    The gcode was working perfectly the previous day. Can't understand that it could be hardware otherwise I wouldn't be able to jog? I don't have limits installed and they are disabled.

    Regards
    Nic
    Reply With Quote Reply With Quote
  2. 12-18-2019, 08:36 AM #2
    Jim Dawson's Avatar
    Jim Dawson
    Jim Dawson is offline Community Moderator
    Join Date
    Dec 2013
    Posts
    5717

    Re: Mach3 g-code not running when Start Cycle

    Try another known good file and see what happens. And copy & paste the first few lines of the problem code into a post so we can take a look at it.
    Jim Dawson
    Sandy, Oregon, USA
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Tormach PCNC 1100 running Mach3 loses Z-axis zero at the start of an operation
    By maucampbe in forum Tormach Personal CNC Mill
    Replies: 2
    Last Post: 11-28-2019, 08:00 PM
  2. Mach3 Getting Stuck Running Code
    By mhead007 in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 03-08-2018, 02:04 AM
  3. g-code cycle not start
    By pisagor in forum Mach Mill
    Replies: 5
    Last Post: 11-20-2012, 03:52 AM
  4. Mach3 start running, I know how to set their own variables
    By nemocapt99 in forum Mach Wizards, Macros, & Addons
    Replies: 0
    Last Post: 05-20-2012, 10:44 PM
  5. Initial Start Up Running Mach3
    By Ferrari2007 in forum Machines running Mach Software
    Replies: 3
    Last Post: 12-09-2009, 10:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules