Hi guys,
I have been using a fiber laser marking machine since 3-4 years, now i need to connect a rotary device with it which i recently bought from China.
I have searched online for the connections with the drive and the connections in the machine power supply etc, just tried the connections but failed, the rotary didn't work.
Can anyone guide from the start about the complete wiring of this rotary device with 6 wires (usually steppers have 4 wires)? Connection in the drive, position of drive dip buttons, and connections from the drive to the machine.
I have attached pictures of:
Rotary Device and Drive
Back view of my machine.
Looking forward to the help.
Regards