512,384 active members
3,366 visitors online
Register for free
Login
IndustryArena Forum > Metalworking Machines > Hardinge Lathes > Parameters & custom macros for CHNC II SP
Results 1 to 3 of 3
  1. #1

    Parameters & custom macros for CHNC II SP

    Hi all, apologies for bringing up yet again what seems to be a never ending topic in this forum, Parameters.

    I have just bought a CHNC II SP with Fanuc 10TF control. From a mechanical/electrical/pneumatic viewpoint, all appears to be well.

    However, the machine came with no software backup or a list of parameters that should be set. I have jotted down all the parameters I can find, but it would be nice to compare what the machine currently has vs. what it should have - some parameters may have been played with in the last 35 years! Does anyone have a parameter settings list for this machine please? I have been trying to find one via eBay for some time, but no luck so far.
    Also, it would appear that the built-in custom macros have been deleted at some point in its history (custom macros 9120 - 9150). I guess I could work around their absence, but they would be nice to have. Does anyone have these handy please?

    Thanks ,
    Richard

  2. #2
    Registered
    Join Date
    Nov 2011
    Posts
    29

    Re: Parameters & custom macros for CHNC II SP

    I have that machine running now but the parameters are not written down . If you can't find i well help ! also got parts .
    Ed

  3. #3

    Re: Parameters & custom macros for CHNC II SP

    Thanks Ed. Much appreciate the offer. If no-one else comes through in the next day or two with an existing list, I'll come back to you. If you need, I can let you have my list as a starting point...
    Cheers, Richard

Similar Threads

  1. CHNC I PARAMETERS
    By moonman5 in forum Hardinge Lathes
    Replies: 8
    Last Post: 08-21-2019, 10:27 PM
  2. Custom mcodes and macros
    By CS900 in forum Fanuc
    Replies: 0
    Last Post: 03-19-2019, 05:41 PM
  3. Drilling Macros for CHNC II
    By MadMan5000 in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 2
    Last Post: 09-18-2011, 02:00 PM
  4. Dyna 4M macros and custom G codes
    By dave design in forum Dyna Mechtronics
    Replies: 1
    Last Post: 10-29-2010, 02:46 AM
  5. Need Custom macros for Fanuc 3M
    By brgrii in forum Fanuc
    Replies: 1
    Last Post: 07-23-2006, 02:30 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •