[rockhopper345]

hi everyone, I bought a new 2x4 plasma table it has a candcnc set up and I have a hypertherm 45 plasma cutter.
I thought because I have a cnc router I could figure this out.. I was wrong. if your near Minneapolis and are up for a challenge I will make it worth your while.(give you cash money)

[machinehop5]

hi everyone, I bought a new 2x4 plasma table it has a candcnc set up and I have a hypertherm 45 plasma cutter.

Which manual should we be looking for your machine?
https://www.candcnc.net/manuals/

[rockhopper345]

Hi Machinehop5, I'm thinking I have the ESP II it has the DTHC II module and the plug for the Hypertherm powermax 45.machine interface.
I have the T45m torch. the computer comes on and I can push the arrow buttons and the gantry will move. But that's as far as I have the guts to go. I have not turned the plasma cutter on at all. I'm not to comfortable whit the whole thing. I would love to go and see someone who has one up and running and get a lesson. or better yet have someone come over and show me how to use mine. I will be happy to pay cash for their expertise and kindness.
thanks
Marv