Did you use the Motion Manager Wizard to try tune?
I have not used this yet as i must wait for my CAN bus adapter first.
In the video you posted... In comparison, my X-Axis, moves much smoother, but still needs tuning.
I am running from Step/Dir mode. Pusles from Ruida controller.
How are you controlling the movement in the video?
My Y-axis does not move.
What is the "F" command you are referring to? Is it a CAN command?
If you sending a CAN command I found the Decimal to Hex value a bit confusing in the beginning.
Examples: (I think/I hope, this is correct...)
STW 0x77 Value Load Step Width 77 01 00 00 00 01 (01 = LSB)
STN 0x64 Value Load Step Number 64 50 C3 00 00 01 (50000 Decimal = C350 Hex)
Results 61 to 62 of 62
-
02-22-2021, 09:29 AM #61
Registered
- Join Date
- Apr 2006
- Posts
- 13
Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!
-
02-22-2021, 01:26 PM #62
Registered
- Join Date
- Apr 2006
- Posts
- 13
Re: Faulhaber Servo Motor and driver , needs CANbus interface to setup , help!
Which version of Motion Manager are you using?
Thanks
Reply With QuoteSimilar Threads
-
AC Servo Driver and AC Motor, Step driver and Motor 0.4-7.5 Kw...
By gtrade in forum For Sale OnlyReplies: 1Last Post: 09-03-2015, 09:38 AM -
TB6560 stepping motor driver and 5 AXIS CNC interface board
By dedikul in forum Stepper Motors / DrivesReplies: 1Last Post: 02-06-2015, 02:50 AM -
Mach 3 interface to stepper motor driver
By dhookings in forum Machines running Mach SoftwareReplies: 8Last Post: 05-28-2014, 05:48 PM -
Changing Fanuc AC servo driver and motor for a regular VFD and async motor
By Bordaco in forum Servo Motors / DrivesReplies: 4Last Post: 09-08-2011, 11:41 PM -
Omron 500W AC Servo driver for robot setup
By robo_plasma in forum Servo Motors / DrivesReplies: 0Last Post: 01-06-2007, 10:28 PM
Tags for this Thread
Posting Permissions
