Joakim,
"machining_time"
It does not show a time (see output below), what am I doing wrong?
Best Regards,
Mauri.
*PROGRAM_START*
(madCAM 5Xtra 4 Axis for Mach4)
(File Created: "datetime")
"documentname"
(Tool Path Profile "method")
(Tool Number = "toolnr")
(Tool Offset Number = "tooloffsetnbr")
(Tool Name = "toolname")
(Tool List = "cutter_tool_list")
(Tool Dia = "tool_diameter")
(Tool Radius = "tool_radius")
(Tool Radius Compensation = "tool_radius_compensation")
(Tool Length = "tool_length")
(TIME/PROGRAM: estimated programtime: = "machining_time")
(X = "xwidth", Y = "ywidth", Z = "zheight")
()
(madCAM 5Xtra 4 Axis for Mach4)
(File Created: 07-Feb-20 4:57:40 AM)
(Tool Path Profile Planar)
(Tool Number = 28)
(Tool Offset Number = )
(Tool Name = BALL_END_9.525 Roughing .03TT)
(Tool List = BALL_END_9.525 Roughing .03TT)
(Tool Dia = 9.525)
(Tool Radius = 4.762)
(Tool Radius Compensation = 9.525)
(Tool Length = 38.000)
(TIME/PROGRAM: estimated programtime: = )
(X = 299.878, Y = 89.154, Z = 91.900)
()