I have a Fadal 4020 it work fine but in a job of 4 Al plate I notice that the spinddle have some issues it reduce RPM but I finish the job but I turn the M03 manually and the drivers when to fault but on M04 the machines works fine
Any suggestions to check?
Results 1 to 13 of 13
Threaded View
-
02-07-2020, 08:53 PM #1
Registered
- Join Date
- Jan 2018
- Posts
- 6
Need Help Fadal Turn M04 but not M03
Reply With QuoteSimilar Threads
-
Fadal retrofit upgrade reusing existing Fadal servo drives and Motors Video
By cnckeith in forum FadalReplies: 4Last Post: 09-09-2021, 05:51 PM -
the machine does not turn on the monitor and turn on all status LEDs.
By pedrobg in forum FanucReplies: 2Last Post: 09-22-2019, 11:29 PM -
Fadal founder unleashes NXGen control for retrofitting your Fadal
By carbidecraters in forum FadalReplies: 3Last Post: 09-21-2014, 01:04 AM -
MachStdMill Turn and Mill-Turn Announcement
By mvcalypso in forum Screen Layouts, Post Processors & MiscReplies: 4Last Post: 11-16-2012, 03:38 PM
Tags for this Thread
Posting Permissions
