584,333 active members*
6,423 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2020
    Posts
    1

    Post deckle maho E10 trouble

    hi
    I have a trouble with machine. it can not be started after made a change of the tool. the error code "E10 input spindle/feed halt 0-signal"display on the screen.and about ten minutes later,the machine could be restarted again. I have no idea with it. so I should ask for help to solve the problem.

  2. #2

    Re: deckle maho E10 trouble

    I have a similar problem with my Maho. If i let the machine on stand by for a few minutes , then it freezes and if try to give a command it displays E10 error. I am having an engineer next week to lock at the machine and then I will let you know.

  3. #3

    Re: deckle maho E10 trouble

    So E10 is an alarm from the PLC when a working condition is not met like door limit switches or in my case because the coolant tank was overflowing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •