OK, from what I have read an ISO30 or BT30 tool-holder will work. The difference appears to be in the provisions for the pull stud.
Tool Holders:
Going with the BT30, there is EBay where you can search using just bt30; you can buy directly from Emco, you can contact Zak Lyons
[email protected]; Andrew Manus may have some he can be found ad
www.manus.biz; or you can try Maritool, look at
http://www.maritool.com/Tool-Holders...duct_info.html
Collets:
If you are in a hurry you can order individual collets from mscdirect.com. If you can wait there are entire collet sets available on EBay new direct from China. I just ordered a set and am wiating for it to arrive. I have read good things about the chinese collets on various forums but have not gotten my yet so I cannot comment.
Someone else will probably chip in th ename of another vendor that sells on ebay that has Emco toolholder, pull studs and collets but I cannot remember the store name.
I am jelous, I was ready to try some milling last sunday then decided I needed to lube my mill before doing any real work with it. Should have a gallon of lube today so I can get on with it.
BR,
Lan