I just did a little write up on adding an inexpensive pendant to Mach3.
It is not very configurable, but I found a way to change the buttons.
See my write-up here:
https://www.kronosrobotics.com/inexpensive-cnc-pendant
I just did a little write up on adding an inexpensive pendant to Mach3.
It is not very configurable, but I found a way to change the buttons.
See my write-up here:
https://www.kronosrobotics.com/inexpensive-cnc-pendant
Author of: The KRMx01 CNC Books, The KRMx02 CNC Books, The KRmc01 CNC Milling Machine Books, and Building the HANS Electric Gear Clock. All available at www.kronosrobotics.com