January 2020 Webinar Series | Day 2 - Stock Wizard & Toolpath Features
Webinar Replay Topic:
CAM Tree: Stock, Machine Setup & Machining Features
Day 2 2020 Webinar Series
Are you new to CAM software or just new to our CAM? Not sure how the "Tree" works or what machining features are? Watch this webinar replay and learn about common CAM features you'll use when setting up and programming your parts
https://youtu.be/2Juez71tHnM
Key Takeaways
How to use the stock wizard and pick your machine setup location
How to use CAM Tree templates
How to create machining strategies
How to change toolpath wizard defaults
Al DePoalo
Partner Product Manager BobCAD CAM, Inc. 866-408-3226 X147