[Tazdingo]

Hi guys...i just bought Makita RT700 and in the box it had only collet for 6mm and 8mm diameter tools. But i have a lot of tools with 4mm 3mm 2mm shank diameter tools. I try to bought corresponding collet at my local shops and they don't know what to offer with exception of some who offer very professional brand name collets and pretty expensive original ones with prices like 15-20 euros for peace. I saw some spring collets on ebay and alliexpress but i could not find in any description if they fit my router. Does any of you has any experience what will fit and what will not fit ?

the first ones are ER11 will they fit?
and on the second and third picture they where in the box

[ger21]

You'll need to get some reducer sleeves to fit in your Makita collets, like these:

https://www.amanatool.com/rb-160-hig...?ff=1&fp=10538

https://www.amanatool.com/rb-164-hig...?ff=1&fp=10540

https://www.amanatool.com/rb-166-hig...?ff=1&fp=10541


Or these collets:
https://www.elairecorp.com/makitaroutercollets.html


Or an ER11 Collet holder with a 6mm or 8mm shank.

https://www.ebay.com/itm/C8-ER11A-15...4AAOSwW7ldXx~F