New on the job; and having to get a Emmegi Phantom T3 Star up and producing again.

Trying to grasp at any available materials to learn CAMplus, Drill, and the Job program to speed things up.

Does anyone know of some good resources for any media to help with the learning process? I've tried to go out to the machine, and I can get around with making and exporting operations from CAMplus, but getting the machine to do the operation with the specified tool is a pain. I have to go back and forth between CAMplus and Drill, and make sure the tool I'm specifying is actually in the setup, and even when I do make sure the tooling is correct, it still wants to throw up an error at me.

Thanks for any help!