RELEASE NOTES FOR PATHPILOT V2.4.3
March 2020
ENHANCEMENTS
All
l We reorganized the options for set start line on the G-Code tab. The most commonly used option is now listed first. (PP-2820)
FIXED ISSUES
All
l We fixed issues where:
o In the G-Code tab, files with an M30 command included at the end of the program didn't automatically scroll back to the first line. (PP-2830)
o Selecting either Stop or Reset didn't affect the playback of videos in an M01 comment. (PP-2819)
o In some situations, selecting Set start line (no preparation) from the G-Code tab could have applied incorrect tool offsets. (PP-2813)
o Creating a G-code file from a .dxf file added tool changes after M03 and M08 commands rather than before. (PP-2811)
Mills
l We fixed issues where:
o G84 tapping cycles occasionally stalled after the spindle reversed directions. (PP-2818)
o When using the Spindle Override slider, the RPM DRO field sometimes displayed a value higher than the machine's maximum rpm. (PP2808)