584,333 active members*
6,807 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > GibbsCAM > Gildemeister CTX620 Siemens 840d post needed
Results 1 to 3 of 3
  1. #1

    Gildemeister CTX620 Siemens 840d post needed

    Hello everyone!
    I am looking for a post for GibbsCAM for the Siemens 840d control on my 2008 Gildemeister CTX620 linear. The machine has a turret with driven tools, a y-axis and of course a C-axis.
    Thanks already!!

  2. #2

    Re: Gildemeister CTX620 Siemens 840d post needed

    Hello everyone! Me again...I do have some posts for trade if that helps...I have some 4 axis Okuma posts and some other ones...maybe someone wants to trade rather than give away.,,,,

  3. #3
    Join Date
    Mar 2020
    Posts
    5

    Re: Gildemeister CTX620 Siemens 840d post needed

    Good luck finding a decent Siemens post from Gibbs. My experience with Gibbs post writers working on Siemens have been poor at best. It seems they know very little about Siemens controls and REFUSE to read or follow a programing manual. It took weeks to correct the drilling cycle on a Siemens 3 axis mill posts. Their view was Fanuc does it like this. Not what I want to hear for my $$$ maintenance fee. By the way I would share if I had one.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •