I've spent a couple of days trying to figure this out and i'm not getting anywhere with CamBam. I'm trying to mill a wing and I need to be able to cut both sides. Im having an aligning issue on the z axis.
So what i'm doing is milling one side and aligning the top to zero (first picture).My stock is 1" thick and when I set it up to cut the other side I flip the part along the parts center origin and then align the bottom (which was the top) at the bottom of my stock (second picture). The issue is when I go to mill the other side it cuts everything about an 1/8 of an inch too deep. I have the settings set the same for the part and its flipped along the x axis.