Hi Guys, long time no talk. I'm adding a shop-made 4th axis to my Partner VII and have a question about tuning the following error. I'm using a Glentek GA370-3 amplifier and an SEM MT30U4-42 servo motor. I know how to tune the linear axes to 0.050" error at 100 IPM but the document I have does not mention what following error to target for the 4th. Does anyone know, or is 4th axis following error not a thing? I've never run a 4th if you can't tell.
Thanks!
Thread: 4th axis following error target?
Results 1 to 2 of 2
-
04-02-2020, 06:19 PM #1
Registered
- Join Date
- Feb 2012
- Posts
- 9
4th axis following error target?
-
04-26-2020, 08:11 PM #2
Registered
- Join Date
- Feb 2012
- Posts
- 9
Re: 4th axis following error target?
Anybody? Surely someone knows
Reply With QuoteSimilar Threads
-
Applying acceleration to MPG Target? Is this possible?
By mmurray70 in forum Dynomotion/Kflop/KanalogReplies: 6Last Post: 12-15-2017, 02:25 AM -
Target practice ?
By TrickyCNC in forum DIY CNC Router Table MachinesReplies: 24Last Post: 03-10-2012, 10:38 PM -
Target model has intersections???
By Spencer myers in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 11Last Post: 12-25-2011, 04:50 AM -
Galil Used in target practice !!
By Al_The_Man in forum Controller CardsReplies: 0Last Post: 09-14-2011, 06:40 PM -
Keeping Men On Target
By WallCrawler in forum Community Club HouseReplies: 2Last Post: 05-22-2004, 03:37 AM
Tags for this Thread
Posting Permissions
